Barco RS900004/05 Projector User Manual


 
6. Web Interface
Image 6-14
Output ports
Display Timeout
If there is no input signal detected during the dis play timeout period, both outputs are s et to blank.
The display timeout can be set by moving the slider to the left or right until the de sired delay is reached.
Output ports (DisplayPort - DVI-I)
When a port is connected with a display, a green LED before the port name lights up.
Output port e nable-disabled
An output can be enabled, what means that a video signal can be sent to the display. Or, a port can be disabled what means that
no video signal is sent to the display.
To enable an output port, check the checkbox next to Enable.
Resolution
The resolution of the output video signal can be set to the desired value. Select a value which is supported by the connected display.
To select a resolution, click on the drop down box next to Resolution and selec t the des ired v alue.
When Auto is selected, the video output signal resolution will be the one that ts best w ith the connected display and will be based
on the Preferred Timing as described in the m eeting room display or projector EDID.
When Custom is selected, two extra input elds for horizontal and vertical resolution are display ed. T he current displayed values
are taken from the information described in the meeting room display or projector EDID. Edit the current values with the desired
horizontal and vertical resolution. If a custom resolution is entered that is not described in the EDID, the timing is generated by the
Base Unit following the VESA CVT standard with reduced blanking. The calculation is based on the ofcial VESA c a lculation.
ClickShare position
As the base unit supports dual display, an output can be associated with the prim ary displa y or w ith the secondary display. Auto-
matically the second input is as
sociated with the free display.
To change the position, click on the drop down box n ext to ClickShare Position and select the pos ition. The corresponding dis play
is associated with the output port.
48
R5900004 CLICKSHARE 19/08/2014