Filter
Top Products
DS62-Network, DS62-MD4 Network/Modem Host Module
21
Login Setup Menu
This menu allows the admin user to enable or disable the Access Control, Manage Users, Direct Port
Connection, Radius, and TACACS configuration. Depending on what firmware the Host Module has,
the Login Setup menu may be different than what is shown in this figure, but are defined below.
Access Control
This security feature allows the admin to enable or disable usernames and passwords for both network
and serial port access.
If either login has been enabled you will get a prompt similar to the following:
The default user and password is “root/baytech”, all lower case.
Manage Users
This menu allows the administrator to add/delete users and change their passwords for multiple users.
Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and
alphanumeric. The root user can not be removed. Select Manage User and the DS displays the
following:
Port ID Echo is...................Disable
d
Disable Port ID Echo..............1
Use Module, Port Number...........2
Use Device Name...................3
Exit..............................X,CR
Enter Request :
Telnet Login Prompt Enable/Disable..1
Serial Login Prompt Enable/Disable..2
Modem Login Prompt Enable/Disable...3
Enter Request :
Coldfire login: root or Universal DS login: root
Password: Password:
Access Control..................1 Telnet/Serial Enable/Disable Login prompt
Manage Users....................2 Change user password or port access,
add/delete user,
Direct Port Connection..........3 Enable/Disable
Radius Configuration............4 See below for Radius menu
TACACS Configuration............5 See below for TACACS menu
Exit.........................X,CR
Enter Request :