Filter
Top Products
DS62-Network, DS62-MD4 Network/Modem Host Module
41
NOTE: This part of the program is derived from the DS62 module program, thus the DS62
reference.
Restore Configuration Defaults
This option allows the admin to restore the DS configuration to factory defaults.
NOTE: The network default IP Address, Subnet, and Gateway is 0.0.0.0
Select Restore Configuration Defaults and the DS displays the following:
A YES response and the DS will display:
Get Current Configuration File
This option allows the admin to get a copy of the current DS configuration file from the unit and FTP’s
it to your computer. The configuration file to be uploaded is named “confupload”. The file maybe
opened with any text file editor.
NOTE: Save a copy of the “confupload” file under a different name, just in case a mistake is
made that prevents the unit from operating properly. If the unit appears to not respond, power-
cycle the unit and type semi-colon five times. If it appears the unit is still not responding,
follow the reset procedures to reset the module.
Select Get Current Configuration File and the DS displays:
A YES response and the DS will display the following:
***error in config upload file or transfer operation***
ENABLING THIS WILL ERASE ALL CONFIGURATION BACK TO FACTORY
DEFAULTS AND RESET THE UNIT
Set Configuration to Factory Defaults? (Y/N)
SETTING DEFAULT CONFIGURATION
set default password file
USING DEFAULT SSL CERTIFICATE
System reset in progress...
This board is a Universal DS Controller
..........Uncompressing...done.
Enabling this will allow the system configuration
file to be retrieved via ftp
Enable Confi
g
uration File Retrieval?
(
Y
/
N
)