Filter
Top Products
DS62-Network, DS62-MD4 Network/Modem Host Module
39
Note: There will be no confirmation the groups have been deleted. Select option 1 from the
Outlet Group Configuration to verify all outlet groups were deleted.
Firmware / Config Download
This option allows the admin to flash upgrade the firmware to the Host module through an FTP client.
The admin can upload the configuration file, make changes, and download back to the unit. This
feature ensures multiple units will have the same configuration without having to manually configure
each unit separately.
NOTE: Contact Baytech Support for the instruction sheet and firmware upgrade file.
Enable Firmware Upgrade
This option must be enabled to upgrade the firmware via FTP. The DS unit will display the following,
Default is Disabled:
IMPORTANT: Do not type ‘Y’ unless you have received the instructions and firmware from
Baytech’s Technical Support. If you typed ’Y’ and see the following below, turn power off
than back on to the unit to close the firmware upgrade.
At this point follow the instruction to FTP the firmware into the unit.
Delete ALL outlet groups? (Y/N): y
# Group Name Outlets
Strike ENTER to continue
Enable Firmware Upgrade...........1
Enable SSL Cert Upload............2
Enable Configuration File Upload..3
Restore Configuration Defaults....4
Get Current Configuration File....5
Display Configuration Error Log...6
Exit..............................X,CR
Enter Request :
Enabling this will allow the firmware to be updated via ftp
Enable Firmware Upgrade ? (Y/N)
Waiting to receive compressed image file
----------------------------------------------------------------------------
----------------------------------------------------------------------------
---------------------------------------------