Filter
Top Products
DS62-Network, DS62-MD4 Network/Modem Host Module
5
ABOUT THIS OWNER’S MANUAL
This document is applicable to the DS62 Network Module and the DS62-MD4 Network/Modem
Module EXCEPT those paragraphs specifically mentioning the DS62-MD4 do not apply to the
DS62. This document provides information required for installing and operating your Bay Tech
equipment. It should allow the user to connect to, power up, and access an applications menu where
peripheral equipment can be controlled. We recommend reading this manual carefully, while placing
special emphasis on correct cabling and configuration. If you have any problems with your installation,
please contact a BayTech Applications Engineer at 228-563-7334, or toll free from anywhere in the
United States using 1-800-523-2702 or contact us at our Web Site, www.baytech.net.
BayTech manufactures many remote site management products, data switches, and remote power
controllers. If you would like information on any of these products, please contact BayTech Customer
Service at the above numbers or visit our web site.
Conventions used in this manual include:
CAUTION: This term is used to denote any condition that could possibly result in physical
harm to personnel or damage to equipment.
IMPORTANT: This term is used to denote conditions that could result in the loss of
communications or to highlight the proper functioning of equipment.
NOTE: This term is used to denote items of interest to the user.
<cr>: Carriage Return or ENTER
The information in this document is subject to change without notice. The statements, configurations,
technical data, and recommendations in this document are believed to be accurate and reliable, but are
presented without express or implied warranty. Users must take full responsibility for their applications
of any products specified in this document. The information in this document is proprietary to Bay
Technical Associates, Inc.
In the interest of improving internal design, operational function, and/or reliability, Bay Technical
Associates, Inc reserves the right to make changes to the products described in this document without
notice.
Bay Technical Associates, Inc does not assume any liability that may occur due to the use or
application of the product(s) or circuit layout(s) described herein.
BayTech units are in accordance with the general requirements of Standard for Information
Technology Equipment (ETL listed, conforms to ANSI/UL STD 60950-1-2003 CERTIFIED
CAN/CSA C22.2 NO. 60950-1-03, UL STD 231 8TH EDITION, UL STD 1950 3RD EDITION
CERTIFIED CAN/CSA 22.2 NO. 950-95, CE conforms to IEC 60950-1).
We welcome any comments you may have about our products, and we hope that you will continue to
look to BayTech for your remote management needs.