Filter
Top Products
DS62-Network, DS62-MD4 Network/Modem Host Module
23
Select the Change Password option to change the user password, the Host Module displays the
following:
Select “Change Port Access Rights” to change the user’s assigned ports. If you select the “root user”
the Host Module will display the following:
Select a non-root user and the DS displays:
Type ‘all’ and press <cr>, the DS displays all ports available to ‘user1’:
Type ‘none’ and press <cr>, the DS displays the user with no assigned ports:
To add specific ports to the user, enter the module/port numbers as shown.
User name: root
Enter old password (CR if none)>*******
Enter new password (<= 31 characters)>*******
Confirm by re-entering new password>*******
Password change successful.
root user always has access to all ports and access rights can not be change
d
Port access for user1
X = has access
| mod 2 | mod 3 |
| 1234 | 1234 |
Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports:
all
Port access for user1
X = has access
| mod 2 | mod 3 |
| 1234 | 1234 |
XXXX XXXX
Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports:
none
Port access for user1
X = has access
| mod 2 | mod 3 |
| 1234 | 1234 |