Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 113
Chapter 3: Configuration
3.10.3 Switch Status
The function Switch Status gathers the information of all VLAN status and reports it by the order of Static NAS MVRP MVP Voice
VLAN MSTP GVRP Combined.
Web Interface
To Display VLAN membership status in the Web interface:
1. Click VLAN membership.
2. Specify the Staic NAS MVRP MVP Voice VLAN MSTP GVRP Combined.
3. Display membership information.
Figure 3-54. The VLAN Membership Status for Combined Users screen.
Parameter Description
VLAN User (Scroll to select the type of VLAN user):
VLAN User module uses services of the VLAN management functionality to configure VLAN memberships and VLAN port
configurations such as PVID and UVID. Currently we support the following VLAN user types:
Web/SNMP: These are referred to as static.
NAS: NAS provides port-based authentication, which involves communications between a Supplicant, Authenticator, and an
Authentication Server.
MVRP: Multiple VLAN Registration Protocol (MVRP) allows dynamic registration and deregistration of VLANs on ports on a
VLAN bridged network.
GVRP: GARP VLAN Registration Protocol (GVRP) allows dynamic registration and deregistration of VLANs on ports on a VLAN
bridged network.
Voice VLAN: Voice VLAN is a VLAN configured specially for voice traffic typically originating from IP phones.
MVR: MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each VLAN. Multicast traffic for all
channels is sent only on a single (multicast) VLAN.
MSTP: The 802.1s Multiple Spanning Tree protocol (MSTP). It uses VLANs to create multiple spanning trees in a network, which
significantly improves network resource utilization while maintaining a loop-free environment.
• VLAN ID: Indicates the ID of this particular VLAN.
• VLAN Membership: The VLAN Membership Status Page shall show the current VLAN port members for all VLANs configured
by a selected VLAN User (selection shall be allowed by a Combo Box). When ALL VLAN Users are selected, it shall show this
information for all the VLAN Users, and this is by default. VLAN membership allows the frames classified to the VLAN ID to be
forwarded on the respective VLAN member ports.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icon, upper right of screen (Refresh): Click to refresh the LLDP Neighbors information manually.
LGB1108A