Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 145
Chapter 3: Configuration
3.14.9 DSCP Classification
This section describes how to configure and map DSCP value to a QoS Class and DPL value. Others the settings relate to the
currently selected unit, as shown in the page header.
Web Interface
To configure the DSCP Classification parameters in the Web interface:
1. Click Configuration, QoS, DSCP Translation.
2. Scroll to set the DSCP Parameters.
3. Click the Save button to save the setting.
4. To cancel the setting, click the Reset button to revert to previously saved values.
Figure 3-78. The DSCP Classification Configuration screen.
Parameter Description
• QoS Class: Available QoS Class value ranges from 0 to 7. QoS Class (0–7) can be mapped to following parameters.
• DPL: Drop Precedence Level (0–1) can be configured for all available QoS Classes.
• DSCP: Select DSCP value (0–63) from DSCP menu to map DSCP to corresponding QoS Class and DPL value
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LGB1108A