Filter
Top Products
724-746-5500 | blackbox.com
Page 20
724-746-5500 | blackbox.com
Chapter 2: System Configuration
• Daylight Savings Time Set Offset: Daylight savings time is used in some countries. If you select this setting, the unit will
adjust the time, forward or backward in increments of one hour, between the starting date and the ending date that you select.
For example, if you set the daylight savings offset to be 1 hour, when the time reaches the starting time, the system time will be
increased one hour. And when the time reaches the ending time, the system time will be decreased one hour.
The switch supports valid configurable daylight savings times of –5 to +5 hours in one-hour increments. The zero for this
parameter means you will not have to adjust the current time to enact daylight saving. However, remember that if you do set
the unit to observe daylight savings time, you will need to set the starting/ending date as well. If you do not set the start/end
dates, the daylight savings function will not be activated.
Provide the daylight saving time set offset in this space. The offset is given in minutes east of GMT. The valid range is from 1 to
1440 minutes. The default is 60 minutes.
• Daylight Savings Type: Provide the daylight savings type selection. You can select “By Dates” or “Recurring” type for Daylight
saving type.
• From: To configure when daylight savings start date and time, the format is “YYYY-MMDD HH:MM”.
• To: To configure when daylight savings end date and time, the format is “YYYY-MMDD HH:MM”.
NOTE: The under “from” and “to” was displayed what you set on the “From” and “To” field information.
LGB1108A