Filter
Top Products
724-746-5500 | blackbox.com
Page 58
724-746-5500 | blackbox.com
Chapter 3: Configuration
LGB1108A
Parameter Description
Hash Code Contributors
• Source MAC Address: The Source MAC address can be used to calculate the destination port for the frame. Check to enable
the use of the Source MAC address or uncheck to disable. By default, Source MAC Address is enabled.
• Destination MAC Address: The Destination MAC Address can be used to calculate the destination port for the frame. Check
to enable the use of the Destination MAC Address, or uncheck to disable. By default, Destination MAC Address is disabled.
• IP Address: The IP address can be used to calculate the destination port for the frame. Check to enable the use of the IP
Address, or uncheck to disable. By default, IP Address is enabled.
• TCP/UDP Port Number: The TCP/UDP port number can be used to calculate the destination port for the frame. Check to
enable the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP Port Number is enabled.
Aggregation Group Configuration
• Locality: Indicates the aggregation group type. This field is only valid for switches.
- Global: The group members may reside on different units. The device supports two 8-port global aggregations.
- Local: The group members reside on the same unit. Each local aggregation may consist of up to 16 members.
• Group ID: Indicates the group ID for the settings contained in the same row. Group ID “Normal“ indicates there is no
aggregation. Only one group ID is valid per port.
• Port Members: Each switch port is listed for each group ID. Select a radio button to include a port in an aggregation, or clear
the radio button to remove the port from the aggregation. By default, no ports belong to any aggregation group. Only full
duplex ports can join an aggregation and ports must be in the same speed in each group.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.