Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 33
Chapter 2: System Configuration
2.6.3 Users
The function is used to configure SNMPv3 users. The Entry index key is UserName. To create a new UserName account, check the
<Add new user> button, enter the user information, and then check <Save>. The maximum number of groups is 10.
Web Interface
To display the SNMP Users Configuration in the Web interface:
1. Click SNMP, Users.
2. Specify the Privilege parameter.
3. Click Save.
Figure 2-15. The SNMP Users Configuration screen.
Parameter Description
• Delete: Check to delete the entry. It will be deleted during the next save.
• User Name: A string identifying the user name that this entry should belong to. The string length should be 1 to 32, charac-
ters, using ASCII characters from 33 to 126.
• Security Level: Indicates the security model that this entry should belong to. Possible security models are:
- NoAuth, NoPriv: No authentication and no privacy.
- Auth, NoPriv: Authentication and no privacy.
- Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means it must first be ensured that the value is set
correctly.
• Authentication Protocol: Indicates the authentication protocol that this entry should belong to. Possible authentication proto-
cols are:
- None: No authentication protocol.
- MD5: An optional flag to indicate that this user uses MD5 authentication protocol.
- SHA: An optional flag to indicate that this user uses SHA authentication protocol.
The value of security level cannot be modified if an entry already exists. That means you must first make sure that the value is set
correctly.
LGB1108A