Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 129
Chapter 3: Configuration
3.13 GVRP
GVRP is an application based on Generic Attribute Registration Protocol (GARP), mainly used to automatically and dynamically
maintain the group membership information of the VLANs. The GVRP offers the function providing the VLAN registration service
through a GARP application. It makes use of GARP Information Declaration (GID) to maintain the ports associated with their
attribute database and GARP Information Propagation (GIP) to communicate among switches and end stations. With GID
information and GIP, GVRP-state machines maintain the contents of Dynamic VLAN Registration Entries for each VLAN and
propagate these information to other GVRP-aware devices to set up and update their knowledge database, the set of VLANs
associated with currently active members, and through which ports these members can be reached.
3.13.1 Configuration
This page describes how to configure the basic GVRP Configuration settings for all switch ports. The settings relate to the
currently selected unit, as shown in the page header.
Web Interface
To configure GVRP Port Configuration in the Web interface:
1. Click GVRP configure.
2. Specify GVRP Configuration Parameters.
3. Click Save.
Figure 3-66. The GVRP Global Configuration.
Parameter Description
• GVRP Mode: GVRP Mode is a global setting, to enable the GVRP globally select 'Enable' from menu and to disable GVRP
globally select “Disable.“
• Port: The Port column shows the list of ports for which you can configure per port GVRP settings. There are two configuration
settings which can be configured on per-port basis.
- GVRP Mode
- GVRP rrole
LGB1108A