Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 87
Chapter 3: Configuration
3.6.6 IPv6 SSM Information
This section describes how to configure the entries in the MLDv2 Information Table. The MLDv2 Information Table is sorted first
by VLAN ID, then by group, and then by Port No. Different source addresses belonging to the same group are treated as a single
entry.
Each page shows up to 64 entries from the MLDv2 SSM (Source Specific Multicast) Information table, the default being 20,
selected through the “entries per page“ input field. When first visited, the form will show the first 20 entries from the beginning
of the MLDv2 Information Table. The “Start from VLAN“, and “group“ input fields allow the user to select the starting point in
the MLDv2 Information Table.
Web Interface
To display the MLDv2 IPv6 SSM Information in the Web interface:
1. Click Configuration, MLD Snooping, IPv6 SSM Information.
2. To auto-refresh the information, click Auto-refresh.
3. Click “Refresh“ to refresh a particular entry.
4. Click “<< or >> “ to move to previous or next entry.
Figure 3-38: The MLDv2 Information screen.
Parameter Description
• VLAN ID: VLAN ID of the group.
• Group: The Group address of the group displayed.
• Port No.: Switch port number.
• Mode: The filtering mode maintained on a (VLAN ID, port number, or Group Address) basis. It can be either Include or Exclude.
• Source Address: IP Address of the source. The system limits the total number of IP source addresses for filtering to 128.
• Type: Indicates the Type. It can be either Allow or Deny.
LGB1108A