Filter
Top Products
724-746-5500 | blackbox.com
Page 84
724-746-5500 | blackbox.com
Chapter 3: Configuration
• Icons, upper right of screen (Refresh, <<, >> ): Click “Refresh“ to refresh the IGMP Group Status manually; click the arrows
to navigaate to the next page or entry.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
3.6.3 Port Group Filtering
This section describes how to set Port Group Filtering for the MLD Snooping function to add new groups and safety policies.
Web Interface
To configure the MLD Snooping Port Group Configuration in the Web interface:
1. Click Configuration, MLD Snooping, Port Group Filtering Configuration.
2. Click the Add new Filtering Group.
3. Specify the Filtering Groups with entries per page.
4. Click the Save button to save the setting.
5. To cancel your changes, click the Reset button to revert to previously saved values.
Figure 3-35. The MLD Snooping Port Group Filtering Configuration screen.
Parameter Description
• Delete: Check to delete the entry. It will be deleted during the next save.
• Port: The logical port for the settings. You can evoke to enable the port to join filtering group.
• Filtering Groups: The IP Multicast Group that will be filtered.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LGB1108A