Filter
Top Products
724-746-5500 | blackbox.com
Page 134
724-746-5500 | blackbox.com
Chapter 3: Configuration
3.14.2 Port Policing
This section provides an overview of QoS Ingress Port Policers for all switch ports. Because voice and video usually maintain a
steady rate of traffic, Port Policing is useful in constraining traffic flows and marking frames above specific rates.
Web Interface
To display the QoS Port Schedulers in the Web interface:
1. Click Configuration, QoS, Port Policing.
2. Select which port needs to enable the QoS Ingress Port Policers, and key in the Rate limit condition.
3. Scroll to select the Rate limit Unit with kbps, Mbps, fps and kfps.
4. Click Save to save the configuration.
Figure 3-69. The QoS Ingress Port Policers Configuration screen.
Parameter Description
• Port: The logical port for the settings contained in the same row. Click on the port number to configure the schedulers.
• Mode: Check the port to enable the QoS Ingress Port Policers function.
• Rate: To set the rate limit value for this port, the default is 500.
• Unit: To scroll to select what unit of rate includes kbps, Mbps, fps and kfps. The default is kbps.
• Flow Control: To evoke to enable or disable flow control on port.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LGB1108A