Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 19
Chapter 2: System Configuration
2.2 Time
This section describes how to configure the switch time, including Time Configuration and NTP Configuration.
2.2.1 Manual
The switch provides manual and automatic ways to set the system time via NTP. Manual setting is simple. Input “Year”, “Month”,
“Day”, “Hour”, “Minute” and “Second” within the valid value range indicated in each item.
Web Interface
To configure Time in the Web interface:
1. Click Time, Manual.
2. Specify the Time parameter in manual parameters.
3. Click Save.
Figure 2-4: The time configuration screen.
Parameter Description
• Clock Source: Select which clock source to use for the Gigabit Managed Switch. You can select “Use local Settings” or “Use
NTP Server.”
• Local Time: Show the current time of the system.
• Time Zone Offset: Provides the time zone offset relative to UTC/GMT. The offset is given in minutes east of GMT. The valid
range is from -720 to 720 minutes.
LGB1108A