Filter
Top Products
4-12
Confidential
3. IF YOU REPLACE THE LASER UNIT
■ Inputting the adjusted value of the laser scanner
(1) Double-click the brmainte.EXE file (maintenance utility).
(2) Select “Input Information” from Menu. Select the applicable model name.
(3) Check the port (USB) that the machine is connected through.
(4) Select “Adjust Scanner” from Menu. Enter the serial number (the last four digits) which
is affixed to chassis of the right side of the Main PCB into the box on the right hand
side.
(5) Click the OK button.