Brother 1660e Printer User Manual


 
2001/10/02
CHAPTER 3 "PCL5C" - 10
3. COLOR PALETTES
3.1. Set Color #1
Command
ESC*v#A (27)(42)(118)#(65) <1Bh><2Ah><76h>#<41h>
Range = -32767 ~ 32767
Default value = 0
This command sets the red value in the palette. Use the Set Color to Palette command to set the value
The value range to be set varies depending on the specified black/white reference.
3.2. Set Color #2
Command
ESC*v#B (27)(42)(118)#(66) <1Bh><2Ah><76h>#<42h>
Range = -32767 ~ 32767
Default value = 0
This command sets the green value in the palette. Use the Set Color to Palette command to set the value.
The value range to be set varies depending on the specified black/white reference.
3.3. Set Color #3
Command
ESC*v#C (27)(42)(118)#(67) <1Bh><2Ah><76h>#<43h>
Range = -32767 ~ 32767
Default value = 0
This command sets the blue value in the palette. Use the Set Color to Palette command to set the value.
The value range to be set varies depending on the specified black/white reference.
3.4. Set Color to Palette
Command
ESC*v#I (27)(42)(118)#(73) <1Bh><2Ah><76h>#<49h>
Range = 0 ~ (2
n
- 1) (The value n is specified by the Bit/Index setting in the Set PCL Color Setting command.)
Default value = 0
This command sets the red, green and blue values which are set by the Set Color #1, #2, #3 commands in the
palette.
When an out of range value is set, it is ignored in the palette.
This command sets the value which was set by the Set Color #1, #2, #3 commands to 0.
3.5. Select Color
Command
ESC*v#S (27)(42)(118)#(83) <1Bh><2Ah><76h>#<53h>
# = 0 ~ current palette size
Default value = 0
This command selects the color as the index number in the palette.
This command is valid for text, underline, rule and graphics.
This command does not affect the User-defined color pattern or HP-GL/2. (The HP-GL/2 command selects
the color using the SP command.)
The value to be selected by this command is never affected by the Set PCL Color Setting, Set Render
Algorithm, Download Dither Matrix or Set Gamma Correction commands.