Filter
Top Products
2001/10/02
CHAPTER 2 "PCL" - 7
1. COMMAND LIST
Control Codes 11
Escape sequences 12
Esc&k#G Line termination 12
Esc&s#C End-of-line wrap 12
EscY Display function mode 13
EscZ Display function mode 13
Environments 14
Job Control 15
Esc&l#A Page size 15
Esc&l#G Output tray 15
Esc&l#H Paper source 16
Esc&l#U Left long-edge offset registration 16
Esc&l#Z Top offset registration 17
Esc&l#S Simplex/duplex printing (For HL-1660e/2060/HL-3400CN) 17
Esc&a#G Paper side selection 17
Esc&l1T Job separation command 18
EscE Reset 18
EscCR FD Reset to factory default settings 18
EscCR!#R Reset to user settings 18
Escz Printer self test 18
Esc%-12345X Exit current emulation mode 18
EscCR## Change emulation mode 19
The Page 20
Esc&u#D Unit of measure 23
Esc&a#L Setting the left and right margins 23
Esc&a#M Setting the left and right margins 23
Esc9 Resetting the horizontal margins 24
Esc&l#E Setting the top margin 24
Esc&l#C Setting the vertical motion index (VMI) 25
Esc&k#H Setting the horizontal motion index (HMI) 25
Esc&l#D Setting line spacing 26
Esc&l#F Text length 26
Esc&l#P Page length 27
Esc&l#L Perforation skip 27
Esc&a#R Vertical cursor positioning -rows 28
Esc*p#Y Vertical cursor positioning - units 28
Esc&a#V Vertical cursor positioning - decipoints 28
Esc&a#C Horizontal cursor positioning - columns 29
Esc*p#X Horizontal cursor positioning - units 29
Esc&a#H Horizontal cursor positioning - decipoints 30
Esc&f#S Using the cursor position stack 30
Esc= Half line feed 31
Esc&l#O Logical page orientation 31
Esc&a#P Text direction 31
Using fonts 33
Esc(3@, Esc)3@ Selecting the default fonts 35
SI, SO Switching between the primary and secondary font 35
Esc*c#R Symbol set ID code command 37
Esc(f#W Define symbol set 37
Esc*c#S Symbol set control command 39
Esc(symbol set ID Select the symbol set 39
Esc(s#C, Esc)s#C Select the symbol set 40
Esc(s#P, Esc)s#P Selecting the type of character spacing 41