Filter
Top Products
2001/10/02
APPENDIX D REFERENCE LIST OF MX-2000/4000/5000 SERIES UNIQUE COMMANDS -
7
3.1.4. PCL output tray setting
Command
Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>
Parameter
# denotes the output tray.
• 1: Select the printer face-down output tray.
• 3: Select #1 bin of the Mailbox unit.
• 4: Select #2 bin of the Mailbox unit.
• 5: Select #3 bin of the Mailbox unit.
• 6: Select #4 bin of the Mailbox unit.
• 7: Select #5 bin of the Mailbox unit. (except HL-3260)
• 8: Select #6 bin of the Mailbox unit. (except HL-3260)
• 9: Select #7 bin of the Mailbox unit. (except HL-3260)
• 10:
Select #8 bin of the Mailbox unit. (except HL-3260)
• 11:
Select #9 bin of the Mailbox unit. (except HL-3260)
• 12:
Select #10 bin of the Mailbox unit. (except HL-3260)
Default = 1
Explanation
• This command selects the specified output tray, trays defined as Mailboxes are numbered from the bottom of
the unit upwards
• This command is ignored when the specified tray is not available.
• The PJL OUTBIN command is ignored when this command is executed.
• Refer to the Technical Reference Guide Section 4.1.2 ‘Output tray’ in Chapter 2 ‘PCL’.
3.1.5. PS output tray & mode setting
Command
<HL-2060>
# setoutputmode
<HL-2460/3260>
<</BROutbinMode #>> setpagedevice
Parameter
#
• 0: Select the printer face-down output tray.
• 1: Select the stacker function.
• 2: Select the sorter function.
• 4~10: Select the printer face-down output tray.
• 11: Select #1 bin of the Mailbox unit.
• 12: Select #2 bin of the Mailbox unit.
• 13: Select #3 bin of the Mailbox unit.
• 14: Select #4 bin of the Mailbox unit.
• 15 Select #5 bin of the Mailbox unit. (except HL-3260)
• 16: Select #6 bin of the Mailbox unit. (except HL-3260)
• 17: Select #7 bin of the Mailbox unit. (except HL-3260)
• 18: Select #8 bin of the Mailbox unit. (except HL-3260)
• 19: Select #9 bin of the Mailbox unit. (except HL-3260)
• 20: Select #10 bin of the Mailbox unit. (except HL-3260)
Default = 0