Filter
Top Products
2001/10/02
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 3
1. INTRODUCTION
This manual covers the general specifications and the command reference list of the FS-5050 Finisher/Stapler
units, which are optionally installed onto the HL-3260 printer.
2. GENERAL SPECIFICATION
The Finisher/Stapler unit is an option for the HL-3260 printer.
Function Description
Finisher/
Stapler
Printed pages can be sorted or stapled.
3. COMMAND REFERENCE LIST
This section describes the specific commands as listed below used to support the functions of the
Finisher/Stapler unit.
1) PJL output tray
2) PCL output tray
3) PS output tray
4) PJL staple on/off
5) PS staple on/off
6) PJL job offset on/off
7) PS job offset on/off
8) PCL job separate
For the details on each command, refer to the following sections.