Filter
Top Products
118
CHAPTER FIFTEEN
ERROR MESSAGE CAUSE ACTION
DOCUMENT JAM Documents were not inserted or fed properly, See Document Jam in this chapter.
or document was longer than 90 cm.
INK EMPTY XXXX One or more of the ink cartridges is out of ink. Replace the ink cartridges. See
Replacing the Ink Cartridges in this
chapter.
MACHINE ERROR XX
MFC has a mechanical problem Cut the power off. Then contact your
Brother dealer for service.
MEMORY FULL You can’t store data in the memory. See Memory Full Message in chap. 11.
NEAR EMPTY XXXX
One or more of the ink cartridges is running Order a new ink cartridge now.
out of ink.
NO RESPONSE/BUSY
The number you dialled does not answer or Verify the number and try again.
is busy.
NOT ASSIGNED You tried to access a One Touch or Speed Dial Set up the One Touch or Speed Dial
number that is not programmed. number.See chap. 8.
PLS OPEN COVER A page, piece of paper or paper clip, etc. Press the Scanner cover release button
may be jammed inside the MFC. and lift the scanner cover. If you see any
jammed paper or other item, gently pull
it out, then close the scanner cover.
If the error message remains, open and
close the scanner cover again. If the
MFC cannot reset itself and return to the
date and time prompt, it will display
MACHINE ERROR XX. Then contact
your Brother dealer for service.
PRINTER JAM The recording paper is jammed in the MFC. See Printer Jam in this chapter.
SET CARTRIDGES An ink cartridge is not installed properly. Re-install the ink, seating it properly.
See Replacing Ink Cartridges in this
chapter.
WARMING UP The print head detects low temperature. Wait until the MFC warms up.