Brother MFC-760 All in One Printer User Manual


 
5
INTRODUCTION
10
Colour Printer Keys:
On/Off Line
Use this key to turn the printer online
(ready to receive PC data) and offline
(not ready to receive PC data)
alternately. When the printer is online,
the LCD displays ONLINE.
Reset
Clears data from the printer memory,
and then resets and restores to the
factory default settings.
Print Priority
Press this key if you want to print PC
data without interruption from incoming
faxes. Faxes will be stored and can be
printed later.
Ink Management
Cleans the ink print heads and/or resets
the ink dot counter after replacing any
of the ink cartridges.
11
Dial Pad
Dials phone and fax numbers, and can
be used as a keyboard for entering
information into the MFC.
12
Colour Copy Keys:
Paper Type
Use this key to temporarily change the
paper type setting for Copy and Video
Printing modes.
Brightness
Lets you temporarily adjust the
brightness of the whole image to be
lighter or darker.
Enlarge/Reduce
Lets you reduce or enlarge copies
depending on the ratio you select.
(25% to 400%)
Copy Quality
Use this key to temporarily change the
quality for Copy and Video Printing
modes.
Mono Copy
Makes a black-and-white or single-
colour copy.
Colour Copy
Makes a full-colour copy.
13
Facsimile Keys:
Tel-Index
Lets you look up numbers stored in the
dialling memory.
Speed Dial
Lets you dial stored phone numbers by
pressing a two-digit number.
Redial / Pause
Redials the last number called. Also
inserts a pause in autodial numbers.
R (Recall)
Use this key to gain access to an outside
line and/or to recall the operator or
transfer a call to another extension when
it is connected to a PABX.
Stop
Stops a fax, cancels an operation, or
exits from function mode.
Start
Starts an operation, such as sending a
fax.