Filter
Top Products
35
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. ANSWER MODE
Choose the mode that best suits
FAX 7
your needs: FAX,
EXT.TEL/TAD, MANUAL.
2. RING DELAY Number of rings before the
RING DELAY:02
7
MFC answers in FAX mode.
3. FAX DETECT Receive fax messages without ON 7
pressing the Start key.
4. REMOTE CODE Enter code to activate your OFF 7
MFC from a remote location. (
51)
5. REDUCTION Reduces size of image. AUTO 7
6. MEM. RECEIVE Automatically stores any ON 7
incoming faxes in its memory
if it runs out of paper.
7. POLLING RX You call another fax machine to STANDARD 7
receive a fax from it.
8. PC INTERFACE Turn on if PC is connected to ON 7
MFC for PC receiving of fax
messages.
3. SETUP SEND
Function Description Factory Set Chapter
1.
COVERPG SETUP
Automatically sends a OFF 6
programmable cover page or
prints a sample cover page.
2.
COVERPAGE NOTE
Program customized message -- 6
for fax cover page.
3. CONTRAST Change the lightness or AUTO 6
darkness of a fax you are
sending.
4. RESOLUTION Allows you to change STANDARD 6
resolutions page by page.
5. OVERSEAS MODE Special setting for international OFF 6
transmissions.
6. TIMER Set the MFC to send documents -- 6
later.
7. POLLED TX Set Polled Transmission for STANDARD 6
someone to poll your MFC
to receive a fax from you.
8. REAL TIME TX When memory is full, you can OFF 6
send faxes in real time.
1. Fax Functions (continued)