Filter
Top Products
88
CHAPTER ELEVEN
3
Press or to select a paper type.
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:TRNSPRNCY
If you are using Brother coated paper for 360 dpi (BP36CA) or 720 dpi
(BP72CA) or if you are using non-Brother ink jet paper, select INK JET.
4
Press Set. If you did not select INK JET, skip to Step 6.
5
If you selected INK JET, press or to select 360DPI
(Brother 360 x 360), 720DPI (Brother 720 x 720) or OTHER
(non-Brother ink jet) paper type.
6
Press Set.
Using the Brightness Key
You can choose the brightness setting before making a copy.
1
Insert the document in the feeder, or on the scanner glass.
2
Press Brightness.
3
Press to make a darker copy.
—OR—
Press
to make a lighter copy.
4
Press Set when the screen displays your setting.
Copy Quality – Default Settings
Changing Default Settings
Press Menu, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu. Adjust the
colours using the Colour Adjustment, Brightness, and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the
following chart. Press
or to move through the selections for each
setting. Press Set to save your selection. Press Stop to exit —OR—
Press
to select the next setting you want to change.