Confidential
2-15
(16) Disconnect the four Connectors (CN2, CN3, CN7, CN10) from the Main PCB ASSY. (CN2,
CN7: MFC-9840CDW only)
(17) Remove the Screw pan (S/P washer) M3.5x6, and then remove the FG harness NCU.
(MFC-9840CDW only)
Fig. 2-20
(18) Remove the two cup S M3x8 Taptite screws from the front side of the Joint cover ASSY,
and remove two cup S M3x8 Taptite screws from the left side of the Joint cover ASSY.
Fig. 2-21
Joint cover ASSY
Taptite, cup S M3x8
Taptite, cup S M3x8
<Front>
<Left side>
Main PCB ASSY
CN10
CN7
CN3
FG harness NCU
Screw pan (S/P washer)
M3.5x6
CN2
Develop gear plate
ASSY
Taptite, cup S M3x8
<Left side>