Filter
Top Products
Confidential
1-43
One color is light
User Check
- Check the machine’s environment. High temperature and high humidity conditions can cause
this problem.
- Replace the toner cartridge or drum unit with a new one.
- Implement calibration from the control panel.
Step Cause
Check
Result
Remedy
1 Dirt on exposure
drum electrode
Are the electrodes of the
drum unit and the
appropriate color and
machine body dirty?
Yes Clean both electrodes.
2 Dirt on belt unit
electrode
Are the electrodes of the
belt unit and the
appropriate color and
machine body dirty?
Yes Clean both electrodes.
3 Dirt on scanner
windows
Is the scanner windows of
the appropriate color
dirty?
Yes Wipe the dirt off with a
soft, clean, lint free cloth.
4 After replacing the toner
cartridge of the
appropriate color with a
new one, does the same
problem occur even after
printing several pages?
No Replace the toner
cartridge of the
appropriate color.
5
Toner sensor
failure
Does the machine start
printing even after
removing the toner
cartridge of the
appropriate color from the
drum unit?
Yes - Clean the toner sensor
of the appropriate color.
- Check the harness
connection of the toner
sensor PCB ASSY
(TE/NEW) of the
appropriate color.
- Replace the toner
sensor PCB ASSY
(TE/NEW) of the
appropriate color.
Faulty registration
Step Cause
Check
Result
Remedy
1 Registration rear
actuator operating
smoothly or is it
catching.
Does the registration rear
actuator move smoothly?
No Re-assemble the
registration rear actuator.
2 Engine PCB
failure
Is the problem solved after
replacing the engine PCB
ASSY?
Yes Replace the engine PCB
ASSY.