Filter
Top Products
Confidential
3-175
8.50 Side Plate R ASSY
(1) Remove the four cup S M3x6 Taptite screws, four cup B M4x12 Taptite screws and screw
pan (S/P washer) M4x8.
(2) Remove the cup S M4x8 Taptite screw and screw pan (S/P washer) M4x8, and then remove
the Side plate R ASSY from the Frame unit.
Fig. 3-259
*1
Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the
screw) with your hand until you feel that the screw is a little dropped in the hole. Then,
slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten it
according to the specified torque with a screwdriver.
Frame unit
Side plate R ASSY
Taptite, cup S M3x6
Taptite, cup S M3x6
Screw pan (S/P washer)
M4x8 DB
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m) *1
Taptite, cup S M3x6
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m) *1
Taptite, cup B M4x12
(Tightening torque: 0.90 ±0.1 N m) *1
Taptite, cup S M3x6
Screw pan (S/P washer) M4x8 DB
<Right side>
<A view>
“A”
Taptite, cup S M4x8