Filter
Top Products
Confidential
5-29
1.4.20 EEPROM Customizing (Function code 74)
<Function>
This function allows you to customize the EEPROM according to language, function settings,
and worker switch settings.
Note:
If you replace the main PCB, be sure to carry out this procedure.
<Operating Procedure>
(1) Press the 7 and 4 buttons in this order in the initial stage of the maintenance mode.
The current customizing code appears.
(2) Enter the desired customizing code (e.g., 8101 in the case of MFC-9840CDW U.S.
model). The newly entered code appears.
To enter letters “A” through “F”, press the 1 through 6 buttons while holding down the #
button respectively.
Note:
The machine does not work properly when an incorrect code is entered.
(3) Press the Black Start button.
The machine saves the setting and displays the “PARAMETER INIT” on the LCD. The
machine beeps for one second and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit button or no buttons are pressed for one minute in the above
procedure, the machine stops the procedure, beeps for one second and returns to the
initial stage of the maintenance mode.
The modification of the setting data is not saved in this case.
<EEPROM customizing code list>
Destination
DCP-
9045CDN
MFC-
9840CDW
Destination
DCP-
9045CDN
MFC-
9840CDW
US 0001 8101 Ital
y
1004 0116
Canada 0002 0102 Portugal 1018 (1065) 0118 (0165)
Chile, Sweden 1004 0126 (0157)
Argentina
0036 0136
General 1004 0150 (0157)
Brazil 0042 0142 Singapore,
Germany 1004 0103 Thailand,
UK 1004 0104 Malaysia,
France 1005 (1055) 0105 (0155) Philippines,
Norway 1004 0107 (0157) Hong Kong,
Belgium 1008 (1055) 0108 (0155) Indonesia,
Netherlands 1009 (1055) 0109 (0155) Vietnam,
Switzerland 1004 0110 UAE
1004 0140
Finland 1004 0112 (0157) Australia --- 0106 (0156)
Denmark 1004 0113 (0157)
Spain 1015 (1065) 0115 (0165)
New
Zealand
--- 0117 (0156)
* If you can determine the country where the customer uses the machine, enter the code
outside the brackets. If not, enter the code inside.