Filter
Top Products
Confidential
3-54
8.12 Side Cover L ASSY
(1) Remove the cup S M3x8 Taptite screw and three cup B M4x12 Taptite screws.
(2) Release the three Hooks on the bottom and the two hooks on the back side, and then
remove the Side cover L ASSY.
Note:
When removing the Side cover L ASSY, pay attention to the Wire support rope.
Fig. 3-42
*1
Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the
screw) with your hand until you feel that the screw is a little dropped in the hole. Then,
slightly turn it clockwise (in the direction to tighten the screw) with your hand and tighten
it according to the specified torque with a screwdriver.
(3) Remove the Access cover from the Side cover L ASSY.
Fig. 3-43
Hook
Taptite, cup B M4x12
(Tightening torque:
1.20 ±0.1 N m) *1
Taptite, cup S M3x8
Taptite, cup B M4x12
(Tightening torque: 1.20 ±0.1 N m) *1
Hooks
Hooks
Side cover L ASSY
Side cover L ASSY
A
ccess cove
r
3a
3b
<Left side>
<Left side>
Wire support rope