Filter
Top Products
Confidential
1-30
Error code BD
SCANNER ERROR
Black level data error
* This error is indicated on the LCD in the maintenance mode.
Step Cause
Remedy
1 Scanner unit failure Replace the FB unit.
2 Main PCB failure Replace the main PCB ASSY.
Error code BE
SCANNER ERROR
Detection error of scanning starting edge
* This error is indicated on the LCD in the maintenance mode.
Step Cause
Remedy
1 CCD unit failure Replace the CCD unit.
2 Main PCB failure Replace the main PCB ASSY.
Error code BF
Unable to Scan.
Document is too long for duplex scanning. Press Stop key.
Longer document than the specified size is detected in duplex scanning.
Step Cause
Remedy
1 Document front actuator 2 not
operating smoothly or
catching in some position.
Correct smooth operation and that there is no
catching of the document front actuator 2.
2 Document front sensor 2
failure
Replace the document front sensor 2.