Filter
Top Products
BASIC FAX USE
Sending a Fax 19
2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. After sending the document
the contrast setting is set to AUTO (suitable for most documents) automatically.
1
Insert the document face down in the Automatic Document Feeder.
2
Press Menu, 2, 2, 1.
3
Use or to select AUTO, LIGHT, or DARK.
4
When the screen displays your selection, press Set.
5
Press 2 if you have finished choosing settings, and go to Step 6—OR—Press 1 if you want to
select additional settings. The display returns to Setup Send menu.
6
Enter a fax number and press Fax Start.
Fax Resolution
When you have a document in the Automatic Document Feeder, you can use the Resolution key
to temporarily change the setting. Press Resolution repeatedly until the LEDs show the setting you
want.
—OR—
You can change the default setting.
1
Press Menu, 2, 2, 2.
2
Press or to select the resolution you want, and then press Set.
3
Press 2 if you have finished choosing settings—OR—Press 1 if you want to select additional
settings. The display returns to Setup Send menu.
4
Press Stop/Exit.
STANDARD: Suitable for most typed documents.
FINE: Good for small print; transmits a little slower than Standard resolution.
S.FINE: Good for small print or artwork; transmits slower than Fine resolution.
PHOTO: Use when document has varying shades of grey; slow transmission time.