Filter
Top Products
36 Chapter 6
Broadcasting
Broadcasting is automatically sending the same fax message to multiple fax numbers. Using the
Broadcast key, you can include up to 32 One Touch locations, up to 200 Speed Dial locations, and
up to 50 manually dialled numbers (maximum of 282 locations if you did not use up any locations
for Groups, access codes or credit card numbers). However, available memory will vary with the
types of jobs in memory and numbers of locations used for broadcasting. If you broadcast to more
than the maximum locations available, you will not be able to setup transmissions using dual access
and the timer.
The easiest way to broadcast is to first combine frequently used One Touch and Speed Dial numbers
as a Group, which uses up a One Touch key or a Speed Dial #. (Remember, you can have up to six
Groups and Quick Dial numbers can be included in more than one Group). Then by pressing
Broadcast between each location, you can include One Touch, Speed Dial, Groups, and manual
dialling (using the dial pad) in the same broadcast. Use Search/Speed Dial to help you choose the
numbers easily.
After the broadcast is completed, a Broadcast Report will be printed automatically to let you know
the results.
1
Insert the document face down in the Automatic Document Feeder.
2
Enter a number using One Touch, Speed Dial, Search, Group number or the dial pad.
Example: Group number
3
Press Broadcast. You will be prompted to enter the next number.
4
Enter the next number.
Example: Speed Dial
5
Press Broadcast.
6
Enter the next fax number.
Example: Manual dialling, using the dial pad.
7
Press Fax Start.
The machine will read the documents into memory and then start sending faxes to all the numbers
you entered.
■ To skip one of the locations in broadcasting, press Stop/Exit whilst that number
is being dialled. To cancel all locations, press Menu, 2, 6. The locations, which
were cancelled, are printed on the Broadcast Report.
■ Enter the long dialling sequence numbers as you normally would, but keep in
mind that each key counts as one location, so the number of locations you can
call becomes limited.
■ If the line is busy or a connection could not be made for some other reasons
while broadcasting, the machine will redial the number automatically.
■ If the memory is full, press Stop/Exit to abort the job or press Fax Start to send
the portion that is in the memory (if more than one page has been scanned).