Filter
Top Products
USER’S GUIDE
4–40
You can check the fonts saved on the card by printing the list of fonts
with the
Test
button. See “TEST Button” in Chapter 4.
✒ Note
When the fonts on the HDD card are selected in a print job, they are
copied into the printer RAM. It may cause a printer memory full error
because those fonts occupy some RAM space. It is recommended to
install optional SIMM memory to use the downloaded fonts on the HDD
card.
■ Delete
When you select “DELETE” and press the
Set
button, you can enter the
following sub-setting menus to delete macros and fonts or format the
installed flash memory card or HDD card:
Display Message Delete Menu
MACRO ID=##### Delete the selected ID macro.
DATA ID=##### Delete the selected ID data.
FONT ID=##### Delete the selected ID font.
FORMAT CARD Format the flash memory card or HDD
card.
• Macro
When you press the
Set
button at “MACRO ID=#####,” the cursor
moves to the ID number. The printer prompts you to select the ID number
of the macro to be deleted.
Select the ID number with the ▲ or ▼ button and press the
Set
button, so
that the printer deletes the selected macro.
• Data
When you press the
Set
button at “DATA ID=#####,” the cursor moves
to the ID number. The printer prompts you to select the ID number of the
data to be deleted.
Select the ID number with the ▲ or ▼ button and press the
Set
button, so
that the printer deletes the selected data.
• Font
When you press the
Set
button at “FONT ID=#####,” the cursor moves
to the ID number. The printer prompts you to select the ID number of the
font to be deleted.
Select the ID number with the ▲ or ▼ button and press the
Set
button, so
that the printer deletes the selected font.