Filter
Top Products
USER’S GUIDE
4–36
■ Save
When you select “SAVE” and you press the
Set
button, you can enter
the following sub-setting menus to save the macros and fonts in the
installed card:
Display Message Save Menu
SAVE DATA Save data that the printer will receive and
set its ID.
SAVE MACRO Save a macro. This menu appears only in
the HP PCL5C emulation mode.
PRIMARY FONT Save the primary font selected with the
Font
button. This menu appears only in the
HP PCL5C emulation mode.
SECONDARY FONT Save the secondary font selected with the
Font
button. This menu appears only in the
HP PCL5C emulation mode.
DOWNLOAD FONT Save a download font. This menu appears
only in the HP PCL5C emulation mode.
✒ Note
If the capacity of the card becomes low while macros and fonts are being
saved, the display shows the “CARD FULL” error message and they
cannot be saved. Use a new card or delete unnecessary macros and fonts
from the card. The CARD LIST displays the contents and the used
capacity.
• Save Data
You can send data and save it on the card. In this mode, any kind of data
such as PCL data, BR-Script 2 data, and command strings can be saved.
When you select “SAVE DATA” and you press the
Set
button, the
display shows the guide menu.
The guide menu message prompts you to press the
Set
button again so
that the printer exits from the data reception status when you have
finished sending data.
Send the data from your computer and then press the
Set
button.