Filter
Top Products
USER’S GUIDE
5-10
4. Take the Fuser Cleaner out of the Fusing unit by holding the knob
of the Fuser Cleaner.
Fig. 5-7 Take the Fuser Cleaner out
5. Install the new Fuser Cleaner into the guide with the roller side
facing toward you.
Fig. 5-8 Install the Fuser Cleaner
6. Lock the Fuser Cleaner with the Oil Bottle Lock Levers.
7. Close the Top Cover.
8. Press the
Power
button and turn the printer on.
9. Press the
Sel
button and make the printer Off Line.
10.Press the
Reset
button while holding down the
Shift
button.
11. When you see “RESET PRINTER” on the LCD panel, press the ▲
(UP) or ▼ (DOWN) button and select “RESET PARTS LIFE” . Press
the
Set
button and select “FC ROLLER” with the ▲ (UP) or ▼
(DOWN) button.
12.Press the
Set
button and the printer becomes On Line.