Filter
Top Products
CHAPTER 5 MAINTENANCE
5-25
3. Install the new Transfer Roller by putting the left side pin of the
Transfer Roller into the boss on the left hand side of the unit. Adjust
and place the right side knob of the Transfer Roller into the holder.
Fig. 5-31 Install the Transfer Roller
4. Lock the Transfer Roller with the Transfer Roller Lock Levers.
5. Close the Rear Access Cover.
6. Plug in the printer and press the
Power
button to turn the printer on.
7. Press the
Sel
button and make the printer Off Line.
8. Press the
Reset
button while holding down the
Shift
button.
9. When you see “RESET PRINTER” on the LCD panel, press the ▲
(UP) or ▼ (DOWN) button and select “RESET PARTS LIFE” . Press
the
Set
button and select “120K KIT” with the ▲ (UP) or ▼ (DOWN)
button.
10.Press the
Set
button and the printer printer becomes On Line.