Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–33
CARD OPERATION
✒ Notes
BE SURE TO TURN OFF THE PRINTER POWER BUTTON
BEFORE INSTALLING OR REMOVING A FLASH MEMORY
CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED.
The settings in this mode menu are effective only when you have
installed a flash memory card or a HDD card in one of the card slots
in the printer and you have selected the HP PCL5C, HP-GL, or BR-
Script 2 mode. They do not appear when the printer has no card or is
in any other emulation mode.
If you turn the printer off or remove the flash memory card or HDD
card while data is being written onto or deleted from the card, all the
data on the card may be lost.
If the write protect button of the flash memory card or HDD card is
on, this mode menu does not appear.
An HDD card will only fit into slot 2.
Be sure to install a commercial flash memory card or HDD card in the
correct card slot of the printer.
When you are in this mode menu, you can save macros and fonts in the
installed flash memory card or the HDD card.
The sub-setting menus displayed in this mode menu vary according to the
state of the installed card.
Display Message Card Operation
CARD 1 Select Card 1.
CARD 2 Select Card 2.
When two cards are installed, you can select the card that you want to
operate.
When the installed card is not formatted:
When you enter this mode menu with a flash memory card or HDD card
installed but not formatted by this printer, you must first format the card.