Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–1
CHAPTER 4
CONTROL PANEL
DISPLAY AND LEDS
This printer has one liquid crystal display (LCD) and four LEDs on the
control panel. The display can show various messages with up to 16
characters in two rows. The LEDs light to indicate the current printer
status.
Copy Pages Orientation Feeder
Emulation Mode K YMCToner
Ready
Alarm
Mode
Continue
Emulation Economy
Test
Shift Copy
Reset
Font
Set
On Line Data
Feeder
Sel Form Feed
Fig. 4-1 Display and LEDs
Display
The display usually shows the current printer status and emulation mode
setting and toner status. When you operate the control panel, you can
change settings interactively on the display.
When you turn the printer off-line, the display changes to show the
currently selected emulation and informs you that you can make settings
in the current emulation.
If any problems occur, the display shows the corresponding operator call,
error, or service call message to prompt you to take an action. For more
information on these messages, see “TROUBLESHOOTING” in Chapter
6.