Brother HL-2400C Series Printer User Manual


 
USER’S GUIDE
6–16
Printing
Question Recommendation
The printer prints unexpectedly
or it prints incorrect characters.
Cancel the print job from your computer. Then,
turn on and off the printer or reset the printer and
try your print job again.
Make sure your application software is correctly
set up to use this printer and check the printer
driver settings or printer settings in your
application software.
The computer hangs up when
the printer starts printing, or an
application error occurs.
Check to see if the system resources are enough (PC
memory, etc). When you have many applications
open, the system resources of your PC will not be
enough and your PC will hang up. Close applications
you are not using and try again.
My headers or footers appear
when I view my document on
screen but do not show up
when I print them.
Most laser printers have a restricted area that cannot
be printed on. Adjust the top and bottom margins in
your document to allow for this.
Printing takes too long.
When you print color graphic images, there is a
large amount of data and the printer will take a
relatively long time to complete printing.
When you print in Super Fine mode, the printer
will take a relatively long time to finish printing.
When the
Data
LED is blinking, the printer is
making itself ready to print. Printing speed
depends on memory size or performance of your
PC and memory size of the printer.
The printer doesn’t print in
color
The printer may be set in monochrome mode.
Check that the color toner(s) have not run out.