Filter
Top Products
USER’S GUIDE
4–32
PAGE PROTECTION
✒ Note
The setting in this mode menu is effective in the HP PCL5C, EPSON FX-
850, IBM Proprinter XL, and HP-GL modes. It does not appear in the
BR-Script 2 mode.
If print images are too complex to print, the printer may print them out in
parts or only on part of the page. If this occurs, the printer loses print data
and shows a message on the LCD panel.
The page protection function reserves additional memory so that the
printer can create the entire page image in memory before physically
printing it out. This function can be set for letter, A4, or legal size paper.
Select the paper size for page protection.
Display Message Page Protection
PROTECT=AUTO Page protection on only when it is
necessary. (Factory setting)
PROTECT=LETTER Page protection on for letter size paper.
PROTECT=A4 Page protection on for A4 size paper.
PROTECT=LEGAL Page protection on for legal size paper.
PROTECT=OFF Page protection off
To protect pages, you need the memory capacity as shown in the
following table (the following are the minimum requirement):
Protection 600 dpi Color
Off 16 Mbytes
Letter or A4 20 Mbytes
Legal 24 Mbytes
✒ Note
When you use the page protection function, note the following:
If the function setting is changed, all download fonts and macros—
including permanent ones—are cleared. If the memory is too low to
protect pages, page protection does not take effect.