Filter
Top Products
USER’S GUIDE
5-28
REPACKING AND RELOCATING THE PRINTER
!
Caution
Whenever you transport the printer use the packing materials which
are provided with your printer. Also, follow the steps below to re-pack
the printer, or the printer may be damaged which will void the
printer’s warranty.
Before you ship or move the printer, be sure to take out the following
items and put them in separate bags (Do not put them in the printer
carton box);
* the Fusing unit
* the Waste Toner Pack
* the Toner Cartridges
* the (OPC) Belt Cartridge
Wipe off any Oil from the Fusing unit after removing the Oil bottle
from it.
Before you move the printer, be sure to remove the Fusing Unit,
remove the Oil Bottle from the Fusing Unit and then remove the
remaining oil in the Fusing Unit using the Oil Syringe. Discard the oil
according to local regulations.
Fig. 5-33-3 Removing the Oil
How to Repack the Printer
1. Press
Power
button and unplug the printer.
2. Remove the Waste Toner Pack, the Toner Cartridges, the Fusing Unit
and the (OPC) Belt Cartridge from the printer and replace them in their
original packaging. However, do not put them in the printer carton
box.
3. Put the printer in the original packing material and into the original
carton box.
4. Close the carton box and tape it securely.