SmartSwitch 6500 User Guide 2-7
Switch Installation and Setup Switch Installation and Assembly
Figure 2-4 Module placement in the SmartSwitch 6500 chassis
2.2.3 Installing the CSM
Follow these instructions to install the CSM module into the chassis.
1. Remove the metal blank that covers either slot 9 or slot 10 of the chassis (CSMs can reside only in
slots 9 and 10). See the legend on the top edge of the SmartSwitch 6500 chassis.
2. Open the ejectors at the top and bottom of the CSM module.
3. With the ejector labeled
6A-CSM512
at the top, align the top and bottom of the CSM module with
the tracks in the slot (see Figure 2-5).
4. Slide the CSM module into the chassis. The CSM module obscures the view of the tracks at the
bottom of the chassis, so be sure to look at that area as you begin to slide the module into the chassis.
5. Close the ejectors. The installation is complete.
A
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
123
4
6A-IOM-29-4-IR
NO SYNC
DATA
123
4
6A-IOM-21-4
B
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
123
4
6A-IOM-29-4-IR
B
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
123
4
6A-IOM-21-4
B
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
1
6A-IOM-31-1
NO SYNC
DATA
2
6A-IOM-31-1
B
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
123
4
6A-IOM-21-4
NO SYNC
DATA
123
4
6A-IOM-29-4-IR
B
ATM
FAIL/MODECPU
FAIL/OKTSM
NO SYNC
DATA
123
4
6A-IOM-21-4
NO SYNC
DATA
123
4
6A-IOM-21-4
B
ATM
COM
ENET
POWER
ACTIVE
STANDBY
FAIL
ENET RDY
TX DATA
RX DATA
ATM
COM
ENET
POWER
ACTIVE
STANDBY
FAIL
ENET RDY
TX DATA
RX DATA
NO SYNC
DATA
1234
6A-IOM-22-4
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
1234
6A-IOM-22-4
NO SYNC
1234
6A-IOM-22-4
FAIL/MODE
FAIL/OK
ATM
CPU
TSM
NO SYNC
DATA
1234
6A-IOM-22-4
NO SYNC
1234
6A-IOM-22-4
NO SYNC
DATA
123
4
6A-IOM-67-4
PS1 PS2CSMTSM/CPUTSM
109876543
2
1
TSM
(Without CPU) or
Other Modules
Slots 1 – 6
TSM
With CPU
Slots 7 & 8
Power
Supplies
CSM
Slots 9 & 10
REDUNDANCYPWR
100 - 125V - 8.0A
200 - 250V - 4.0A
50/60 Hz
REDUNDANCYPWR
100 - 125V - 8.0A
200 - 250V - 4.0A
50/60 Hz