2-26 SmartSwitch 6500 User Guide
SmartSwitch ATM Administrator Switch Installation and Setup
Figure 2-11 SmartSwitch ATM Administrator
SmartSwitch ATM Administrator can be installed on a workstation running Windows 95/98, Windows NT, or Solaris
2.4/2.5.
For Windows 95/98 or Windows NT, the following minimum hardware configuration is required:
•
Pentium 133 Mhz or faster processor
•
CD-ROM drive
•
20 MB free disk space
•
64 MB RAM
•
Monitor with resolution of at least 800 x 600 pixels
•
Ethernet or ATM network interface card
For Solaris 2.4/2.5, the following hardware configuration is required:
•
Ultra-1 Sparc workstation or equivalent
•
CD-ROM drive
•
100 MB free disk space
•
64 MB RAM
•
200 MB virtual memory (swap space)