Filter
Top Products
SmartSwitch 6500 User Guide 6-11
Virtual Ports and Static Connections Virtual Ports
Things To Watch Out For When Creating Virtual Ports
•
Make certain that the virtual port number (Base VPI) plus the VPIs designated by MaxVpiBits does
not exceed the Available VPIs as specified by
MaxVpiBits in the set portconfig command.
•
If you create more than one virtual port on a particular physical port, make certain that you do not
run out of Available VPIs as specified by
MaxVpiBits in the set portconfig command.
•
If you create more than one virtual port on a particular physical port, make certain that no overlap
occurs among the VPIs used by the virtual ports.
•
Make sure the CAC policy is set correctly for the number of virtual ports.
•
Make certain that the traffic descriptors used by the virtual ports were created with the appropriate
bandwidth and category of service.