Filter
Top Products
SmartSwitch 6500 User Guide 2-21
Switch Installation and Setup Using the Console
2.5.2 Console Commands
Note For detailed descriptions of all console commands, see the SmartSwitch 6500
Reference Manual.
All console commands use the syntax:
operator switch-attribute [<parameter 1> <parameter 2>... <parameter n>]
Where the operator is one of the following:
activate: Make a connection active.
add (create): Add a new instance of a switch-attribute.
backup: Backup the active TSM/CPU configuration.
clear: Clear a table, list, or configuration.
deactivate: Make a connection inactive.
delete (remove): Delete an instance of a switch-attribute.
execute: Perform the following action.
exit: Exit the switch console.
flush: Remove assigned values; for example, flush a route table.
modify (set): Change the values that currently define a switch-attribute.
show (display): Show the current values used by a switch-attribute.
start: Start a process on the switch; for example, start the LAN Emulation Configuration Server.
restart: Restart a process on the switch; for example, restart client.
restore: Restore the TSM/CPU configuration from its backup file.