Filter
Top Products
SmartCell ZX-250 User Guide 2-1
2 SWITCH INSTALLATION AND SETUP
After you read this chapter, you will be able to perform the following tasks:
U Initial installation of the switch
U Complete the initial configuration
U Use the console interface
U Install the SmartSwitch ATM Administrator graphical management software
2.1 UNPACKING THE SWITCH
Remove the accessory carton from the ZX-250 shipping box. Carefully remove the switch from its packing material.
2.2 CHECK ACCESSORY CARTON CONTENTS
Open the accessory carton and check that it contains the following items:
— 7-foot UTP cable terminated on both ends with RJ-45 connectors
— 6-foot AC power cord (1 or 2 cords depending on switch model and options)
— RJ-45 to 9-pin female adapter (labeled PC)
— Console cabling instruction sheet
— Diskettes containing switch software, MIB files, SmartCell ATM Administrator software, and release notes
— Two rack-mount brackets
— two-hole brackets for ZX-250
— four-hole brackets for ZX-250r
— Rack mount bracket screws
— four #8-32 x 0.38 flat head screws for ZX-250
— four #8-32 x 0.38 flat head screws, four #6-32 x 0.38 flat head screws for ZX-250r
— SmartCell ZX-250 Release Notes
— SmartCell ZX-250 User Guide
— SmartCell 6A000/ZX-250 Reference Manual
2p›F If any of these items are missing, contact Cabletron customer support
immediately.