Filter
Top Products
SmartCell ZX-250 User Guide 4-39
Switch Administration Performing Hardware Maintenance
Figure 4-11 Push seated card in with even pressure.
T• Hands on each side of chassis, using even pressure, push on extractor lever arms with thumbs (see
Figure 4-12)
%"¤›apm If the module does not insert easily, DO NOT FORCE it. This may damage
connectors or pins. Pull out the module and attempt to reinsert, checking that the
module is lined up correctly on the nylon guides. For the extractor lever arms to
be effective, the module must be pushed in far enough for the lever arms to
engage slots on the inside walls of the chassis. Failure to properly seat the
module prior to using the lever arms may damage the chassis sheet metal.