Filter
Top Products
18
The Scanner Cartridge is installed after removing the BJ Print Head.
Switch on the printer and open the front cover.
• The BJ Print Head moves to the centre automatically.
Remove the BJ Print Head and insert it into the storage
container.
1 Raise the lock lever and remove the BJ Print Head.
2 Place the BJ Print Head in the storage container.
• To prevent the print head from becoming dirty or drying out,
place the BJ Print Head in a storage container immediately
after you remove it from the printer. The container can be used
to store the BJ Print Head or the Scanner Cartridge.
• To avoid personal injury, never touch the electrical
contacts on the BJ Print Head after removing it from
the printer. The electrical contacts become very hot
during printing.
• To avoid spilling ink on your hands or clothing,
handle the BJ Print Head carefully to avoid
dropping it.
• When you are finished scanning, remove the
Scanner Cartridge from the printer and install the
BJ Print Head in the printer. Do not leave the
Scanner Cartridge installed in the printer.
Install the Scanner Cartridge in the printer.
1 Install the Scanner Cartridge in the holder where you removed the
BJ Print Head.
2 Lower the lock lever to lock the Scanner Cartridge in place.
• To avoid poor scanning performance caused by
static electricity or foreign matter like dust or dirt,
never touch the scanning head or electrical
contacts.
Close the front cover.
4.
Caution
3.
Caution
2.
1.
Storage
container