Filter
Top Products
Loading Paper and Special Print Media
43
Loading Paper and Special Print Media
Raise the paper thickness lever to the mark.
Raise the paper rest, lower and pull out the paper output
tray.
Fan the edges of the sheets to remove static cling. Tap
the edges of the stack against a flat surface so the stack
is aligned.
• To prevent paper jams, always fan the sheets and
align the edges before you load them in the sheet
feeder.
• Handle media carefully by its edges. Never touch
the print surface of the sheets. Dirt or fingerprints
on the print surface will adversely affect print
quality.
• When you use the High Resolution Paper, do not
touch the whiter print side.
Slide the paper guide completely to the left.
With the whiter side facing up, align the stack with the
right side of the sheet feeder and set the stack in the
printer.
• You can load up to 100 sheets (64 gsm) of plain paper
or 80 sheets of High Resolution Paper in the sheet
feeder at one time.
• Do not allow plain paper and High Resolution
Paper to stack higher than 50 sheets on the paper
output tray.
• To prevent warping and bending of the paper, do
not leave High Resolution Paper set in the sheet
feeder for a long time.
• If you print on the paper wider than 216 mm, make
sure you select the Envelope for the Media Type
on the printer driver.
Slide the paper guide to the left edge of the stack.
6.
Caution
Memo
5.
4.
Caution
3.
2.
1.
Loading plain paper or High Resolution Paper HR - 101
Whiter Side
chap-3 (E) 10/2/99 6:23 AM Page 43